Home > Fabric > Fleece Fabrics

Fleece Fabrics

Check out our great selection of performance fleece fabrics! If you know what you are after, use the top menu bar to go directly to what you are looking for or choose the appropriate Sub-Category below. Otherwise scroll down to check out our huge selection of fleece fabrics by the yard.

Sub-Categories

SWB-Tex 3Ply Grid Fortitude Ripstop Multicam Soft Shell

Products (Total Items: 12)

Sort by:

72" Pattern VEX Tracing Material @ $3.95/ linear yard

Pattern VEX is a 72" wide clear sheeting with reinforced polyethylene ribbons and is coated with low density polyethylene. This tough material marks easily with a Sharpie, is see through and easy to work with whether you are tracing from a paper pattern or using it to pattern a Bimini or boat top.

$3.95

Back Order.

68" Polartec 200 Blanket Width Fleece @ $15.95/ linear yard

This Malden Mills 68" Blanket Width Fleece is designed to be the middle or outer layer. This is the most popular weight due to the warmth it provides while adding minimal bulk and weight.

$15.95

Sold in .25, .5, .75 Yd. Increments, .5 Yd. Min.

53" Polartec Power Shield @ $27.95/ linear yard

The next generation of technical outwear - the soft shell. This clothing concept goes beyond traditional 2-layer systems, which feature fleece insulation and a highly water-resistant /breathable shell, to a single layer that protects against all but the worst weather conditions.

$27.95

Sold in .25, .5, .75 Yd. Increments, .5 Yd. Min.

56" SWB-Tex 3 Ply Microfleece @ $27.95/ linear yard

This super tough 7.6 oz / sq. yard. Soft Shell fabric has a 100% Nylon DWR face with a PTFE (Micro Pours Teflon) Membrane and 100% Polyester Micro Fleece backing. This is a new addition to our Soft Shell technical outerwear.

$27.95

Sold in .25, .5, .75 Yd. Increments, .5 Yd. Min.

Fleece material by the yard sold in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
54" Regulator (Waffle) Fleece
A single sided thin fleece with a smooth jersey face and a textured grid backing. This fleece is perfect for a base layer. It is a lightweight fleece that is both warm and highly breathable. The fleece squares trap body heat while also wicking moisture to the surface for faster drying time. Slight mechanical stretch.

Best DIY Projects & Uses for this Fabric: Base layer clothing

Bolt Width: 54"

Fabric Colors Available - Blue Ink, Large Blue Horizon (91/9 ECOPOLY), Garden Green, Picante (91/9 ECOPOLY), Small Blue Horizon, Spring Green, Olive, Forest Green

Fleece material by the yard sold in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Polartec 100 Microfiber Fleece
Constructed with fibers three times finer than silk, giving Polartec its unique soft and subtle finish. Dries quickly, adds superior warmth and will not pill. Excellent for lining jackets or making light weight fleece sweatshirts.

Best DIY Projects & Uses for this Fabric: Lining jackets or outerwear

Bolt Width: 60"

Fabric Colors Available: Moss, Chartreuse, Forest Green, Royal, Periwinkle, Aqua, Lt. Pink, Bright Pink, Neon Pink, Red, Terracotta, Mustard, Sienna, Chocolate, Olive

Fleece material by the yard sold in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Polartec 200 Fleece
This Malden Mills Fleece is designed to be the middle or outer layer. This is the most popular weight due to the warmth it provides while adding minimal bulk and weight. This non-bulky insulation is good for all seasons. Great fleece fabric for blankets, jackets, vests, mittens, hats and a multitude of other projects. Available in a great assortment of colors in a super soft double velour fleece.

Best DIY Projects & Uses for this Fabric: Jackets, vests, blankets, mittens, etc

Bolt Width: 60"

Fabric Colors Available: Black, Charcoal, Royal Blue

Fleece material by the yard sold in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
68" Polartec 200 Blanket Width Fleece
This Malden Mills 68" Blanket Width Fleece is designed to be the middle or outer layer. This is the most popular weight due to the warmth it provides while adding minimal bulk and weight. This non-bulky insulation is good for all seasons. Its wide width makes it perfect for blankets and throws and on other projects, can reduce overall fabric usage due to its extra width. Great fleece material for blankets, jackets, vests, mittens, hats and a multitude of other projects. Available in a great assortment of colors in a super soft double velour fleece.

Best DIY Projects & Uses for this Fabric: Jackets, vests, blankets, mittens, etc

Bolt Width: 68"

Fabric Colors Available: Glade, Pebble, Mid Blue, Kumbo Green, Chocolate Brown, Fire

Fleece material by the yard sold in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Polartec 300 Fleece
The best insulating fleece made. The perfect layer for moderate to severe cold. Wear it under a waterproof shell or as an insulating layer by itself. Ideal hiking, skiing, climbing, paddling and many other outdoor pursuits. Makes great jackets or vests.

Best DIY Projects & Uses for this Fabric: Hiking, skiing, climbing, outdoor clothing

Bolt Width: 60"

Fabric Colors Available: Black

Fleece fabric for sale is available in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Polartec 100 Wind Pro Fleece
A thin light weight version of the new revolution in thermal fabrics that allows you to forgo the use of a shell in all but the most extreme wet or windy conditions. The tight knit construction of the Polartec 100 Wind Pro blocks 95% of the wind, yet is highly breathable. All of this plus a DWR (Durable Water Resistant) finish makes this fabric perfect for outerwear garments. Most fleeces will keep you warm until the wind starts blowing, making an additional shell layer necessary. Polartec 100 Wind Pro insures superior warmth, is a perfect lighter layer that will keep you comfortable even in windy situations.

Best DIY Projects & Uses for this Fabric: Hiking, skiing, climbing, outerwear clothing

Bolt Width: 60"

Fabric Colors Available - Aquamarine (Smooth/Smooth)

Base Fabric: 100% Polyester

FR Standards Met: None

Finish/Coating: DWR

Government Specifications Met: None

Warranty: None

Water Repellent: Yes

Weight: 11 oz./ square yard

Fleece fabric for sale is available in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Polartec 200 Wind Pro Fleece
A new revolution in thermal fabrics allows you to forgo the use of a shell in all but the most extreme wet or windy conditions. The tight knit construction of the Polartec Wind Pro blocks 95% of the wind, yet is highly breathable. Polartec Wind Pro fabric features a unique velour face that gives it superior softness. All of this plus a DWR (Durable Water Resistant) finish makes this fabric perfect for outerwear garments. The slightly denser body of the Wind Pro fabrics makes it really nice to work with.

Best DIY Projects & Uses for this Fabric: Hiking, skiing, climbing, outerwear clothing

Bolt Width: 60"

Fabric Colors Available - Blue T-Rex (Sherpa/Smooth), Navy (Sherpa/Smooth), Light Blue (Sherpa/Smooth), Black(Sherpa/Smooth), Moss (Smooth/Smooth), Kiwi (Smooth/Smooth)

Base Fabric: 100% Polyester

FR Standards Met: None

Finish/Coating: DWR

Government Specifications Met: None

Warranty: None

Water Repellent: Yes

Weight: 13 oz./ square yard

Fleece fabric for sale is available in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Polartec 300 Wind Pro Fleece
The heaviest weight of this thermal fabric allows you to forgo the use of a shell in all but the most extreme wet or windy conditions. The tight knit construction of the Polartec Wind Pro blocks 95% of the wind, yet is highly breathable. Polartec Wind Pro fabric features a unique velour face that gives it superior softness. All of this plus a DWR (Durable Water Resistant) finish makes this fabric perfect for outerwear garments. The slightly denser body of the Wind Pro fabrics makes it really nice to work with.

Best DIY Projects & Uses for this Fabric: Hiking, skiing, climbing, outdoor clothing

Bolt Width: 60"

Fabric Colors Available: Aqua (Sherpa/Smooth), Red (Sherpa/Smooth)

Base Fabric: 100% Polyester

FR Standards Met: None

Finish/Coating: DWR

Government Specifications Met: None

Warranty: None

Water Repellent: Yes

Weight: 16 oz./ square yard

Fleece fabric for sale is available in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Tech Fleece 100 Pro Stretch Advanced Fleece
13.5 oz per linear yard. A 100 weight, single sided, technical, high performance fleece with 94% Polyester 6% Spandex content. Makes great tights and close fitting garments! Plus this fabric is a continuously stocked item!

Best DIY Projects & Uses for this Fabric: Tights and close fitting garments

Bolt Width: 60"

Fabric Colors Available - Black

Base Fabric: 94% Polyester 6% Spandex

FR Standards Met: None

Finish/Coating: None

Government Specifications Met: None

Warranty: None

Water Repellent: No

Weight: 13.5 oz./ square yard

Fleece fabric for sale is available in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Z-Tec Double Velour 4-way Stretch Fleece
11 oz per linear yard. This double sided, 94% polyester 6% stretch fleece gives the comfort of fleece and the fit of spandex. Super soft and warm, it is a great fabric for a base or outer layer and the four way stretch allows freedom of movement. The elastic quality also makes it a perfect choice for cuffs, waistbands and close fitting garments! Plus this fabric is a continuously stocked item!

Best DIY Projects & Uses for this Fabric: base or outer layer clothing

Bolt Width: 60"

Fabric Colors Available - Black

Base Fabric: 94% Polyester 6% Spandex

FR Standards Met: None

Finish/Coating: None

Government Specifications Met: None

Warranty: None

Water Repellent: No

Weight: 11 oz./ square yard

Fleece fabric for sale is available in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Tech Fleece 200
100% Polyester, 12 oz per linear yard. This fleece is a high quality technical fleece. With an anti pill velour face and water resistant finish, it is the perfect mid weight fleece suitable for jackets, vests, blankets and much more! Plus this fabric is a continuously stocked item!

Best DIY Projects & Uses for this Fabric: Jackets, vests, outerwear

Bolt Width: 60"

Fabric Colors Available - Tennis Ball, Neon Orange, Orange, Yellow Taxi, Red, Green Forest, Bright Blue, Blue Frost, Navy, Bordeaux, Purple, White, Buff, Heather Grey, Charcoal Heather, Gun Metal, Black

Base Fabric: 100% Polyester

FR Standards Met: None

Finish/Coating: DWR

Government Specifications Met: None

Warranty: None

Water Repellent: DWR

Weight: 12 oz./ square yard

Sold in 1/4, 1/2 and 3/4 yard increments with a 1/2 yard minimum. Enter partial yard increments in decimal form, eg. 1.5 = 1-1/2 yards
60" Tech Fleece 300
100% Polyester, 16 oz per linear yard. Similar to the Tech Fleece 200 in that it also has an anti pill velour face and water resistant finish, but this fabric is heavier and denser. All of which makes this fabric perfect for low temperature insulation. Plus this fabric is a continuously stocked item!

Best DIY Projects & Uses for this Fabric: Jackets, vests, outerwear

Bolt Width: 60"

Fabric Colors Available - Royal, Taxi Yellow, Red, Forest Green, Navy, Black

Base Fabric: 100% Polyester

FR Standards Met: None

Finish/Coating: DWR

Government Specifications Met: None

Warranty: None

Water Repellent: DWR

Weight: 16 oz./ square yard

Fleece fabric for sale is available in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
60" Polartec Power Shield @ $27.95
Polartec Power Shield fabrics are the next generation of technical outerwear - the soft shell. This clothing concept goes beyond traditional 2-layer systems, which feature fleece insulation and a highly water-resistant /breathable shell, to a single layer that protects against all but the worst weather conditions and delivers extended breathability, abrasion resistance and stretch to enhance your outdoor experience while blocking 98% of the wind. Polartec Power Shield fabrics feature a smooth, tightly woven nylon face for abrasion resistance equal or superior to the best shells, but without the stiffness and noise. A polyester velour back that traps air and provides a high warmth-to-weight ratio. All Polartec Power Shield fabrics are finished with a durable water repellent (DWR) to shed rain and snow. All version feature spandex or mechanical stretch for freedom of movement. Garments made from Polartec Power Shield fabrics are designed to replace traditional fleece and shell systems for most outdoor clothing applications, reducing the weight and number of layers needed to insulate and protect. They are ideal for skiing, snowboarding, winter climbing, cycling and back-country trekking. They are used in jackets, pants, bibs, hats, and gloves. It's outerwear that gets worn, not carried. (5.9 oz./ square yard - 50% Polyester, 44% Nylon, 6% Spandex)

Best DIY Projects & Uses for this Fabric: Jackets, vests, outerwear

Bolt Width: 60"

Fabric Colors Available (Black Fleece): Purple, Violet, Kelly Green, Bright Blue (Bright Blue Fleece), Royal Blue, Light Red (Light Red Fleece), Wine, Navy Blue, Medium Grey, Dark Red

Base Fabric: 50% Polyester, 44% Nylon, 6% Spandex

FR Standards Met: None

Finish/Coating: DWR

Government Specifications Met: None

Warranty: None

Water Repellent: Yes

Weight: 5.9 oz./ square yard

Fleece material by the yard sold in 1/4, 1/2 and 3/4 yard increments with a 1/2-yard minimum. Enter partial yard increments in decimal form, e.g. 1.5 = 1-1/2 yards
56" Weather Guard Softshell
This super soft 7.6 oz / sq. yard. Polyester has a DWR face with a Weather Guard Membrane and Micro Fleece backing. This is a new addition to our Soft Shell technical outerwear. Going beyond traditional 2-layer systems, which feature fleece insulation and a waterproof/breathable shell, to a single layer that protects against all but the worst weather conditions and delivers extended breathability, abrasion resistance and stretch to enhance your outdoor experience. The durable water repellent (DWR) face will shed rain and snow and the mechanical stretch gives freedom of movement. Garments made from Soft Shell are designed to replace traditional fleece and shell systems for most outdoor clothing applications, reducing the weight and number of layers needed to insulate and protect. They are ideal for skiing, snowboarding, winter climbing, cycling and back-country trekking. They are used in jackets, pants, bibs, hats, and gloves.

Best DIY Projects & Uses for this Fabric: Snow and winter outerwear

Bolt Width: 56"

Face Shell Colors Available: White, Black, Red, Forest, Navy Blue, Royal Blue

Premium Camouflage and Fluorescent Color ($3.00 extra): Digital Camouflage, Urban Camouflage, Aquatic Camouflage, Woodland Camouflage, Autumn Camouflage, Carolyn Hot Pink

Base Fabric: 85% Polyester 15% TPU Membrane

FR Standards Met: None

Construction: Polyester Jersey Face, TPU Membrane, Polyester Microfleece Lining

Finish: Thermal Plastic Urethane, DWR

Government Specifications Met: None

Warranty: None

Water Repellent: Yes

Weight: 7.6 oz / square yard